Dutch  Site

=Other Information Sites =

Bisco Electro Handel


This website is made to explain to you about the UcasCam. As you can read in the forums there are lot of questions about the Ucascam and we want to help you to program the Ucascam. Offcourse our visitors are welcome to send e-mail  enquiries and news about the Ucascam.
As  I always say two know more then one.

Beware >>>  You can't find free files here to watch encrypted pay television. E-mails about this subject will not be anwsered. The  purpose of this website is to exchange information and software programs for programming the Ucascams. 
 
New Dutch Firmware for the Nextwave suc 2500 c
v1458dutch Nederlandse firmware


v1458dutch Dutch firmware

 Nextwave C 2500 SUC            


Program ODYST to put the firmware in the Nextwave c 2500 suc 

   

Settings Nextwave suc 2500 c
Settings voor draaibaar nextwave 


Settings rotation nextwave  C 2500 SUC  
       

Settings voor Astra Hotbird C 2500 SUC 


Settings astra/hotbird nextwave  C 2500 SUC  
       

Satedit voor de Nextwave C 2500 SUC 


H

Put the settings in your nextwave  C 2500 SUC  
       

Nextwave Software 
You will need this loaderprogram  for the Nextwave Receiver


Nextwave to Magic

You will need this program to update Nextwave 
So it works like the Magic Module             

Loader for Nexwave receiver read the instruction 


Dreamload_loader for Nextwave    
       
Click here before download

Nieuw 22 sep Here a  pentacrypt 1.11 Thisone works great on the Nextwave


Pentacrypt 1.11 for the Nextwave 
Works Great

 

Be ware with this software you can upgrade the Firmware from the Nextwave


Firmware loader 2K232.exe for Nextwave SUC-2500-C 

       

Here is the firmware for Nextwave suc-2500c


Here is the best running firmware at the moment
suc-2500cv1.458p the German channels will not hang any longer

 

What you need in order to update NEXTWAVE  with other software

At first I must tell you that the Nextwave recipient are differently programmed than the other Ucas machines is why you need another programmer .Normaly by the ucas machine you need a magicloader, but with Nextwave you can program everything with one programmer see on the rightside


Now we are going  program  Nextwave
The required software must be copied to your computer and Nextwave need this software in order to  work exactly as  the Magic Module

hloader102.exe
Dream_load software

Set your receiver off now
connect a null modem cable to the programmer and of course to the PC
Insert  the programmer in your Nextwave with the contacts down in the recipient

start the programme Hloader

Set the correct compoort
Loading file  BL_DREAM021203
Be sure that the block is standing on 0 and Connect

Swich on your receiver now

If it doesn’tstart the download automaticly, press on Send
Now the cam is downloading the software from your computer

When the download is ready you see a message “Transfer Done and  restart the target”

Click OK
Then on Disconnect
and turn off your receiver

Now you must select block 4 and with browse select the desired Pentacrypt and then do exactly the same steps and your recipient should be ready for use.

Set your receiver off now
connect a null modem cable on the programmer and of course on to the PC
push the programmer in your Nextwave with the contacts down into the recipient

start the programme Hloader

Set the correct com port
Loading a file  like pentacrypt 1.05
be sure that the block is standing on 4
and Connect

Switch on your receiver now

If download doesn’t start automaticly press on Send
now the cam is downloading the software from your computer

When the download is ready there is a message “Transfer Done and  restart the target”

Click on OK
Then Disconnect
and turn off your receiver

And now you have an Allcam like the Magic Module


Thanks Victor for the Translation

 

Ucas Cam     Program    Software     Forum    Faq   Receivers    Links     E-mail

webdesign Magic Trance Juny 2003