|
|
|
Manuals for the CAS INTERFACE II |
|
CAS II interface Manual Nederlands ( Thanks
Cardwriter ) |
|
|
CAS II interface Manual English |
|
|
CAS II interface Manual Italy |
|
|
CAS II interface Manual Germany |
|
|
DiaGrams for the CAS INTERFACE II |
|
DIagram Xtreme for the CAS II |
|
|
Diagram Dreambox for the CAS II |
|
|
From here also for the CAS I |
|
Diagram
for some Ucas receivers |
|
NEXTWAVE
SUC-2500-C |
|
|
XTREME |
|
|
MANHATTAN 5900 |
|
|
FORTECSTAR 6000 |
|
|
Divers
Loaders for the new Dreamload |
|
Firmware Pack for CAS
INTERFACE |
|
|
Hex - Dec
Converter |
Type or paste one or more hex or decimal numbers separated by
spaces, then
press Enter or click the appropriate conversion button.
|
|
How to program a Magic Module or other sort of Cams
using the Cas Interface?
You insert the Cas
Card into the Cam (like the regual programmer that
everybody knows) you connect the cam to the Digital
Receiver (this is only to give power supply to the Cam
Module) and then with the Cas Interface Studio you can
do whatever you want.
|
|
What can I program with Cas Interface?
Basically you have
the Flash memory under control so you can program just
the Loader (from location h000000 to location h09fff) or
the Firmware area (from h010000 to the end of Flash
memory). You can clear Loader, clear Firmware or both
|
|
What kind of Flash Memory can I program with Cas
Interface?
You can program all the Flash
memory on the market. On the version 1.0 of Cas
Interface Studio only Hynix and Toshiba Flash Memories
are supported but in a few weeks time we'll perform
algorithms for the other Flash memories that you might
find inside. If the flash memory you have is not
supported you'll be notified by which kind of Flash
memory it is and the ID and manufacturer's code
|
|
How can I program a Cas embedded Digital Receiver?
It's quite easy. with this tool
we'll supply in the download area the connecting
diagrams for Digital Receivers. We did our tests with
Kaon Media's Extreme decoder and with Nextwave Ci 2500
receiver. You just have to connect 5 wires (very easy to
solder) and then proceed like a Cam.
|
|
What are the system requirements to make this tool work?
Just a simple PC running under
Windows 98/ME/2000/XP and a Parallel Port..
|
|
What kind of files can i upload into the Flash Memory?
The files are in binary format (*.bin)
but you can either upload .mbf (that is like .bin no
conversion must be done)..
|
|
Can I program the Loader like Dream Load or other
loaders even if the cam is dameged?
Of course you can! If the damage
has been done by a fake file you can restore the loader
and start again like you have a brand new Cam.
|
|
|
Dutch Site
